I have recently been installing Solaris 10 on a virtualisaed environment on a Sun T5240
I have noticed with each install, I get a similar error that I can't pass
{0} ok boot net - install
Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: - install
Requesting Internet Address for 0:14:4f:fb:fb:f3
SunOS Release 5.10 Version Generic_120011-14 64-bit
Copyright 1983-2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
whoami: no domain name
WARNING: ncp0: unable to determine ncp (cpu) binding (ncp)
Configuring devices.
WARNING: ncp0: unable to determine ncp (cpu) binding (ncp)
Using RPC Bootparams for network configuration information.
Attempting to configure interface vnet0...
Configured interface vnet0
ERROR: bpgetfile unable to access network
/sbin/install-discovery: information: not found
The install sits at the # prompt at this point. I typed 'exit' here, expecting it to error out and found it continues the install, I have done two machines this way and both work properly
Subscribe to:
Post Comments (Atom)
thanks a lot Paul, you saved my hours
ReplyDeleteGot the same prob. net booting an E450 from Fedora, and the same solution worked like a charm, cheers Paul.
ReplyDeleteThankssssss its Working...................
ReplyDeleteI had the same problem.
ReplyDeleteI solved it by forcing the speed/duplex at boot:
boot net:speed=100,duplex=full - install
Usually it means you're installing Solaris in a classless network.:-)
ReplyDeleteTry to make an alias with classful broadcast on bootparam/install server like this (presume you are using 192.168.0/25 network):
ifconfig eth4\:1 inet some-other-ip broadcast 192.168.0.255 (linux like)
ifconfig addif inet some-other-ip broadcast 192.168.0.255
It used to help me.
Many thanks, you also saved hours,,
ReplyDeletecheers,
I owe you a beer! Seriously .. Thanks a lot for this tip.
ReplyDeleteI've tried lot's of stuff but this didn't cross my mind.
Martin
Thanks Titan! you are the one!
ReplyDeleteI seriously owe you a beer.
ReplyDeleteasa
ReplyDelete